No label found for: logo.title
No label found for: logo.title
facebook
My Favorites0
Daikin Europe N.V., Zandvoordestraat 300, 8400 Oostende (Belgium)

T +32 59 55 81 11    E info@daikineurope.com
F +32 59 55 82 90    http://www.daikineurope.com

FFQ-C

Fully flat cassette
Unique design in the market that integrates fully flat into the ceiling

Media

General Information

Product features

  • Fully flat integration in standard architectural ceiling tiles, leaving only 8mm
  • Remarkable blend of iconic design and engineering excellence with an elegant finish in white or a combination of silver and white
  • Individual flap control: flexibility to suit every room layout without changing the location of the unit!
  • Two optional intelligent sensors improve energy efficiency and comfort.
  • No optional adapter needed for DIII-connection, link your unit into the wider building management system.
  • Branch duct discharge allows to optimize air distribution in irregular shaped rooms or to supply air to small adjecent rooms
  • Reduced energy consumption thanks to specially developed small tube heat exchanger, DC fan motor and drain pump
  • Fresh air intake integrated in the same system thus reducing installation cost as no additional ventilation is required
  • Standard drain pump with 675mm lift increases flexibility and installation speed

Benefits

InverterInverter compressors continuously adjust compressor speed to actual demand. Fewer power-consuming starts and stops result in decreased energy consumption (up to 30%) and more stable temperatures. Presence & floor sensorThe presence sensor directs the air away from any person detected in the room, when the air flow control is on. The floor sensor detects the average floor temperature and ensures an even temperature distribution between ceiling and floor. Home leave operationMaintains the indoor temperature at your specified comfort level during absence, thus saving energy Fan onlyThe unit can be used as fan, blowing air without heating or cooling. Draught preventionWhen starting to warm up or when the thermostat is off, the air discharge direction is set horizontally and the fan to low speed, to prevent draught. After warming up, air discharge and fan speed are set as desired. Auto cooling-heating changeoverAutomatically selects heating or cooling mode to achieve the set temperature. Whisper quietDaikin indoor units are whisper quiet. Also the outdoor units are guaranteed not to disturb the quiet of the neighbourhood. Ceiling soiling preventionPrevents air from blowing out too long in horizontal position, to prevent ceiling stains. Individual flap controlIndividual flap control via the wired remote controller enables you to easily fix the position of each flap individually, to suit any new room configuration. Optional closure kits are available as well. Vertical auto swingPossibility to select automatic vertical moving of the air discharge flaps for efficient air and temperature distribution throughout the room. Fan speed stepsAllows to select up to the given number of fan speed.(3 steps) Dry programmeAllows humidity levels to be reduced without variations in room temperature. Air filterRemoves airborne dust particles to ensure a steady supply of clean air. Weekly timerCan be set to start heating or cooling anytime on a daily or weekly basis. Infrared remote controlStarts, stops and regulates the air conditioner from a distance. Wired remote controlStarts, stops and regulates the air conditioner. Auto-restartThe unit restarts automatically at the original settings after power failure. Self diagnosisSimplifies maintenance by indicating system faults or operating anomalies. Drain pump kitFacilitates condensation draining from the indoor unit.(standard) Twin/triple/double twin application2,3 or 4 indoor units can be connected to only a single outdoor unit even if they have different capacities. All indoor units operate within the same heating or cooling mode from one remote control. Multi model applicationUp to 5 indoor units can be connected to a single outdoor unit, even if they have different capacities. All indoor units can individually be operated within the same heating or cooling mode. VRV for residential applicationUp to 9 indoor units (even different capacities and up to 71 class) can be connected to a single outdoor unit. All indoor units can individually be operated within the same mode. Infrastructure coolingRemove in a reliable, efficient and flexible way the heat constantly generated by the IT and server equipment to ensure maximum uptime while offering the best return on investment.

Videos

{{ getDocTypeLabel(documentType) }}

{{ selectedLanguage[documentType] }}

{{ year }}

{{ langDocument.size }} - {{ langDocument.type }}

English

{{ year }}

{{ englishDocument.size }} - {{ englishDocument.type }}